Table of Contents
Advertisement
Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third
submenu. Please use the left/right button on the keyboard or in the speed dome terminal menu
to set.
After completed setup, please click save button to save current setup.
PRESET TITLE: Display dome preset title or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set. You can go to Function Setup->Preset
section to set corresponding preset value and preset title.
AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set
TIME DISP: Display dome system time or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
POSITION: Display the angel between the benchmark and then current location. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
ZOOM DISP: Display speed dome zoom speed or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options:
℃/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
OUTSIDE TEMPERATURE AND HUMIDITY: Display dome external temperature and
humidity. There are three options: ℃/F/Off. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
IDLE TIME: The option includes close/1/2/3/4/5min. The system will exit the menu
automatically once there is no menu operation during the time you specify here. Close
means always show the menu.
BACK: Go back to the previous menu.
EXIT: Log out system menu.
4.4.3
Camera Setting
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the
submenu.
WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button,
you can go to the third menu.
EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you
can go to the third menu.
DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm
button, you can go to the third menu. There are three options: auto/manual/off. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS MODE
：AUTO
FOCUS LIMIT
: 30CM
ZOOM SPEED
: 08
DIGITAL ZOOM
: OFF
APERTURE
: 09
NEXT PAGE
BACK
EXIT
23
Advertisement
Table of Contents
