Slot Load; Removing An Optical Disc; Tray Load; When The Disc Tray Opens Normally - HP Laptop User Manual

Slot load

CAUTION:
the optical drive.
1. Turn on the computer.
2. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up.
3. Gently slide the disc into the slot load optical drive.

Removing an optical disc

Tray load

There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.

When the disc tray opens normally

1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out
the tray (2) until it stops.
56 Chapter 7 Drives
Do not insert 8-cm optical discs into a slot load optical drive. It may cause damage to