Using - IBM 6400 Programmer's Reference Manual

Table 10 (Page 2 of 2). Load Font Equivalence
Byte Value
3 - 4
X 0000
' '
X 5A00
'
5 - 6
7 - 8 X xxxx
' '
X FFFF
'
9 - 10 X xxxx
' '
X FFFF
'
11 - 12 X 0000
' '
13; X ' 00 '
14
Bit 0
Bits 1-2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
15 X 00
' '
16-n
The font equivalences for a given page are those that are in effect when the
Begin Page command processes plus those added in the page state. A
maximum of 254 different font ID-print quality combinations may be defined in
home or page state. Page segments use the font equivalence tables active at
the time the Include Page Segment command processes. In addition, the LFEs
that were stored as part of the page segment add to the font equivalence tables
during the include page segment process up to a maximum of 254 loaded font
ID-print quality combinations.
Each Begin Overlay command starts the overlay with the font IDs currently
defined and will add its LFE entries during the overlay's definition up to a
maximum of 254 loaded font ID or print quality combinations total.
Notes:
1. Additional font equivalence entries, each 16 bytes long, can follow this entry,
2. Use the same Loaded Font ID when using the same Font ID and Code Page
3. Local ID byte 0 may use any value 1 to FE. A value of FF is supported for
4. A double high font can be printed only on a page that is unordered. See
Description
Font Inline Sequence
0 Degrees
180 Degrees
'
GCSGID (Ignored)
CPGID
See "Code Page ID Values" on page 36 Printer
Default as specified by Configuration Settings
'
FGID
See "Code Page ID Values" on page 36 Printer
Default
'
Reserved
Reserved
Font Attributes
0/1 Resident Symbol Set (Ignored)
00 Reserved
0/1 Double High = 1
0/1 Italicized = 1
0/1 Double Strike = 1
0/1 Bold = 1
0/1 Double Wide = 1
Reserved
Additional LFE entries
using the same format.
ID for several Local IDs. This saves storage space and font allocation time
in the printer.
compatibility, but is not recommended. See "Set Character Set" on
page 111 and "Logical Page Descriptor (LPD)" on page 39 for more
information regarding Local IDs equal to FF.
"Logical Page Descriptor (LPD)" on page 39 for more information.
Device Control Command Set
Chapter 3. IPDS Commands Reference
Error Code
X 0247..02
' '
X 021D..02
' '
X 021D..02
' '
X 023A..02
' '
35