Table of Contents
Advertisement
PREFACE
Users of this manual should have a knowledge of
SLT circuits and a basic knowledge of stored pro-
gramming and the instruction set of the system
using the 1132 Printer as an output printer. The
users should also have a general knowledge of the
principles involved in program control of printing
and tape-controlled carriage operations.
The manual includes descriptions of the
following:
1.
Diagnostic techniques and related information.
Fourth Revision
This edition (Form Y26-3621-3)
is
a reprint of the previous
edition (Form Y26-3621-2) and incorporates the FE Supplement,
Form Y26-0587.
The illustrations in this manual have a code number in the lower corner.
This is a publishing control number and is not related to the subject matter.
2.
Maintainability features.
3.
Preventive maintenance schedule.
4.
Service checks, adjustments, and removal pro-
cedures for mechanical components.
5.
Power requirements and sequencing.
6.
Locations of units and components.
Additional description of 1132 operations is pre-
sented in the umM Field Engineering Manual of
In-
struction, 1132 Printer" (Form Y26-3622).
Copies of this and other IBM publications can be obtained through IBM Branch Offices.
A form is provided at the back of this publication for your comments.
This manual was prepared by the IBM Systems Development Division,
Product Publications, Dept. 455, Bldg. 014, San Jose, California 95114.
Send comments concerning the contents of this manual to this address.
©
1965 by International Business Machines Corporation
1132 FEMM (12/66)
ii
Advertisement
Table of Contents
