Setting Network Access Parameters; Logging In To The Web-Based Configuration Utility - Huawei HG630 User Manual

Getting Started
After connecting the cables, press the On/Off button on the side of the HG630
to power on the HG630.
After you power on the HG630, the Power indicator turns on, this indicates that
the HG630 is working properly.
To power off the HG630, press the On/Off button on the side panel,
and then unplug the power adapter.

2 Setting Network Access Parameters

2.1 Logging In to the Web-based Configuration
Utility
Most of the HG630 parameters are preset before delivery to meet common
home application scenarios. To check the HG630's working status or configure
certain advanced network functions, use the web-based configuration utility.
To log in to the web-based configuration utility,
Step 1
Set up network access for your computer. Set the network connection
of your computer to obtain an IP address automatically.
By default, the Dynamic Host Configuration Protocol (DHCP)
function is enabled. The HG630 then assigns an IP address to your
computer automatically. If you disable the DHCP function, please
ensure that the IP address of the computer and that of the HG630
LAN port are in the same network segment to enable the computer to
access the web-based configuration utility.
Step 2
Open a web browser on your computer and ensure that the browser
does not use any proxy servers.
Using Internet Explorer 8.0 as an example to ensure no proxy servers
are used:
1. Choose Tools > Internet Options.
2. On the Connections tab of the Internet Options dialog box, click
LAN Settings.
3