Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei HG610
Summary of Contents for Huawei HG610
-
Page 1: User Guide
HUAWEI HG610 Home Gateway User Guide HUAWEI TECHNOLOGIES CO., LTD. - Page 2 User Guide Issue Date 2009-12-30 Part Number 202178 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang...
- Page 3 Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
-
Page 4: Table Of Contents
2.3 Connecting Multiple Telephones ..............2 2.4 Powering On ....................2 3 Setting the Network-Access Parameters ..........3 3.1 Using the Embedded PPP Dial-Up Software on the HG610 ......3 3.2 Using the PPP Dial-Up Software on Your Computer........4 4 Basic Configuration .................. 5 4.1 Changing the Administrator Password ............5... -
Page 5: Warnings And Precautions
1 Warnings and Precautions Thank you for purchasing the HUAWEI HG610 Home Gateway (hereinafter referred to as the HG610). To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the device described in this section includes the device and its accessories. - Page 6 it off, remove all the cables connected to it, and then contact an authorized service center. During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from getting damage d due to lightning strikes. eas with Inflammables and Explosives Do not use the device where inflammables or explosives are store d, for example, in...
-
Page 7: Connecting Cables And Powering On
After the HG610 is used for a certain period of time, the cover will be heated, which will not affect the function of the HG610. 2 Connecting Cables and Powering On 2.1 Simple Connection... -
Page 8: Connecting One Telephone
2.2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection, take the following figure as a reference for connecting the cables. LINE PHONE MODEM 1. Telephone jack on the wall 2. -
Page 9: Connecting Multiple Telephones
8. Fax machine 2.4 Powering On To power on the HG610, press the power button on the back panel of the HG610. After you power on the HG610, the DSL indicator blinks (for less than three minutes), which indicates that the HG610 is being activated. Later, the DSL indicator turns solid on. -
Page 10: Setting The Network-Access Parameters
3.1 Using the Embedded PPP Dial-Up Software on the HG610 If you select this method for accessing the network, the HG610 starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer. -
Page 11: Using The Ppp Dial-Up Software On Your Computer
8. Select a dialing method, and then click Submit. Step 4 Set LAN parameters. 1. In the navigation tree, choose Basic > LAN. 2. Set the IP address and subnet mask of the LAN connection. 3. Select Enable for DHCP server, and then set the corresponding parameters. -
Page 12: Basic Configuration
If you forget the user name or password that has been changed, you can restore the default settings of the HG610 by pressing and holding the RESET button for over six seconds. Then, the user name and password that are used for logging in to the Web-based configuration utility are restored to default values. -
Page 13: Restoring Default Settings
To restore the default settings, press and hold the RESET button for over six seconds after the HG610 is powered on, and then release the button. In addition, you can restore the default settings of the HG610 through the Web-based configuration utility. - Page 14 voltage restores to its normal level, and then use the terminal. 3. Ensure that the terminal is properly connected to the socket through the power adapter. If the POWER indicator is still off, contact an authorized maintenance center. Step 2 After powering on the terminal, wait for about three minutes.
- Page 15 The user name and the user password are provided by your network operator. Step 6 Check whether you can use the PPP dial-up software to dial successfully. If you cannot use the PPP dial-up software to dial successfully, perform further checks as follows: 1.
- Page 16 or cordless telephones, that generate strong magnetic or electric fields. If the problem persists, contact your service provider. After a broadband terminal is installed, does Internet access degrade call quality or do telephone calls lower the Internet access rate? No. The terminal uses the frequency division multiplexing (FDM) and splitter technologies to separate voice signals from data signals.
-
Page 17: Appendix
The Ethernet connection is not set up. INTERNET Blinking The HG610 works in routing mode, and the WAN connection is set up. Data is being transmitted. The HG610 works in routing mode, and the WAN connection is set up. But no data is being transmitted. -
Page 18: Default Settings
Button RESET You can press and hold the RESET button for over six seconds to restore the default settings of the HG610. Note: After you restore the default settings, your customized data is lost. Therefore, use this function with caution. - Page 19 Item Specification Standards VDSL2 standards G.993.2 Annex B PSD Mask G.994.1 (G.hs) ADSL2+ standard G.992.5 (G.dmt.bitplus) Annex A ADSL2 standards G.992.3 (G.dmt.bis) Annex A G.992.3 (G.dmt.bis) Annex L ADSL standards G.992.1 (G.dmt) Annex A G.994.1 (G.hs) ANSI T1.413 Issue 2...
- Page 20 HUAWEI TECHNOLOGIES CO., LTD. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China www.huawei.com Part Number: 202178...