Removing The Power Switch - Dell Precision Tower 7910 Owner's Manual

6. Install:
a. front bezel
b. front cover
c. left cover
7. Follow the procedures in

Removing the Power Switch

1. Follow the procedures in
2. Remove:
a. left cover
b. front cover
c. front bezel
d. I/O panel
3. Perform the following steps:
a. Disconnect the power switch cable from the I/O panel board.
b. Press down on the power switch module on the sides to release the power switch from its
compartment [1,2].
4. Remove the power switch from the computer.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
37