Installing The Slimline Optical Drive; Removing The Memory Shroud - Dell Precision Tower 7910 Owner's Manual

Installing the Slimline Optical Drive

1. Slide the optical drive into its compartment and ensure it is seated firmly.
2. Connect the power cable and the data cable to the back of the optical drive.
3. Install the left cover.
4. Follow the procedures in

Removing the Memory Shroud

1. Follow the procedures in
2. Remove:
a. left cover
b. optical drive
3. Press down on the blue retaining tabs on each side of the memory shroud and lift the memory
shroud upwards.
4. Press down on the release latch on the other side of the memory shroud module to release it from
the chassis.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
23