Removing The Display Bezel - Motorola A840 Service Manual

Disassembly

Removing the Display Bezel

G
42
1. Remove the battery cover, battery, antenna, keypad bezel, speaker cover,
keyboard stiffener, flip assembly, transceiver board, flip display lens, flip
assembly, flip assembly sleeve, and flip knuckle as described in the procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Use the metal tweezers to release the five latches in the sequence shown (see
Figure 23).
atch
5
Figure 23. Removing the Display Bezel
3. To replace, align the connector with it's socket on the transceiver board.
4. Gently press the flex connector into position onto the flex connector socket.
5. Lower the display bezel over the display module. Gently and firmly press the
latches into position. Ensure all the latches are engaged.
6. Replace the flip knuckle, flip assembly sleeve, flip assembly, flip display lens,
transceiver board, flip assembly, keyboard stiffener, speaker cover, keypad
bezel, antenna, battery, and battery cover as described in the procedures.
June 07, 2004
4
bezel latch
2
bezel latch
A840
3
display bezel
1
032218o
6809485A78-O