Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HuddleCamHD conference camera
Summary of Contents for HuddleCamHD conference camera
- Page 1 DANNOVO HD USB 3.0 PTZ Video Conference Camera User Manual V 2.3(ENGLISH VERSION) Please read this Manual before set up Camera, and stick to its requirements strictly for Safety reason. Suggest you save this manual for further inquires reference.
-
Page 2: Safety Tips
repair or change, the local dealer or the shop where you bought this camera. Accessories 1. 1 x 20x Zoom USB 3.0 HD Video Conference Camera; 2. 1 x Power Adaptor; 3. 1 x Remote Controller; 4. 1 x Control Cable;... -
Page 3: Main Features
Main Features Camera and Lens Video CMOS Sensor: 1/2.5 inch super quality HD CMOS transducer Image: 16:9 2.1 Mega pixel Video Format:YUY2|1920x1080P/30, 1280x720/60 Lens zoom: 10x optical zoom, f=4.5-45mm F1.8-2.2 Focus, 1.0Lux at F 1.8 Visual Angle: 5.4°(farness) -52°(nearness) Minimum Illumination: 10LUX White Balance: Auto/Sunlight/Cloudiness/Shade/fluorescence white balance mode Focus: Auto/Manual Iris: Auto/Manual... - Page 4 Rear Board & function Rear board of camera Front of HD Camera VISCA RS232C IN Connector When connect multi cameras to PC via RS-232C (VISCA IN), use serial cable connect VISCA OUT of the first camera to VISCA IN of the second camera. VISCA Out/RS-485 Control Interface Used for connect Chain Daisy of cameras, or RS485 Control.
-
Page 5: Ir Remote Controller
IR Remote Controller Front Panel: 1. Reset: Restart Camera and restore to factory default settings 2. Camera Selection Select Camera of IR 1,2,3 3. Preset positions 1-9: preset positions Set: Setting preset position Clear: Clear preset position Call: Call preset position Note: if you need set number 1 preset position, you should press Number key “1”, then press “Set”... - Page 6 Regional Keynote functions Restart Camera and back to default Factory Reset settings. Camera ID Chose Chose camera according to your Remote control Chose serial no. of preset position To “Set” as preset position Preset position function area To “Clear” preset position Clear To “Call”...
-
Page 7: Joy-Stick Ptz Keyboard Operation
Power on/off Power-on/off Dome Login DOME OSD Menu OSD Menu Lens Login Lens OSD Menu ＋ Zoom in slowly speed Slow speed Zoom Slow Zoom in/out Zoom out slowly speed － Auto focus automatically Auto Manual focus Manual Lens Focus adjustments Lens zoom in far end Lens zoom in Near end... -
Page 8: Special Preset Positions Function
turn left Left movement turn right Right movement Rotate left Zoom in Rotate right Zoom out Special Preset positions function Preset position Functions Enable stand-by status To display Self-testing menu on screen Image up-side down Login system OSD Menu Set Left limit position of scanning Set right limit position of scanning Restart Camera and return default settings Call Lens OSD Menu of Lens... -
Page 9: Specification Sheet
Specification sheet Model No. DN-HDC08B-CN Sensor 1/3" CMOS 2.1 Mega Pixel Effective Pixels 2.1 Megapixel Image Minimum Scene Illumination Color: 0.1Lux,Black/White: 0.01Lux Sensor White Balance Auto/Manual Gain Control Auto Back-light compensation On / Off E-Shutter 1/30s~1/10000S S/N Ratio > 50db Focus f=5-50mm Lens... - Page 10 Pan Rotation Angle 0~355degree Tilt Rotation Angle 90 degree Auto Pan Scan Support auto pan scan Boundary Scan 0-359 degree (programmable) Remote Controller IR wireless control P/T/Z Power Supply DC12V±10%,1.2A Working Temperature 0-60℃ Environment Humidity 0-95%RH...
-
Page 11: Installation Instruction
Installation instruction Wall/Ceiling installation Mount kits provided with Camera in the package. -
Page 12: Tripod Installation
Tripod Installation To fix the round accessory on bottom board of camera, to match 2 screw position on the bottom board; To match the Tripod on bottom of camera;... -
Page 13: Troubleshooting
Compatibility As we tested with Amcap S/W, Skype, Microsoft Lync, VSEE, Vidyo, DEBUT Software, most of them are Video Conferencing system application, and it works perfect; Troubleshooting Before request service to serviceman or manufacture, it can according to below methods to remove failures, if still can’t be solved, please contact to distributor or manufacture for help.
Need help?
Do you have a question about the conference camera and is the answer not in the manual?
Questions and answers