Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HuddleCamHD HD Color Video Camera
Summary of Contents for HuddleCamHD HD Color Video Camera
- Page 1 HuddleCamHD 20x HD Color Video Camera User’s Manual V 4.5(ENGLISH VERSION) Please read this Manual before set up Camera, and stick to its requirements strictly for Safety reason. Suggest you save this manual for further inquires reference. Contact: (800) 486-5276 www.HuddleCamHD.com...
- Page 2 Precautions Safety Tips Please read this manual carefully before use the Camera. To avoid damage from stress, violent vibration, soaking during transportation, storage and installation. Take care of each components of Camera during installation, and install camera at where is affordable enough, to avoid drop or scratches of camera case.
-
Page 3: Main Features
Supplied Accessories HD Color Video Camera (1) 12V/2.0A DC Power adaptor (1) Installation bracket (1) Installation screw (1) USB3.0 data lines (3m) serial control line RS-232C to RS-485 cable IR Remote Controller (1) User’s Manual (1) Main Features Camera and Lens Video CMOS Sensor: 1/2.8"... -
Page 4: Rear Board Connectors
Preset: 64 preset position, 4 Patrol lines Rear board connectors High Definition Interface: USB 3.0 Controller Signal Interface: 8 leads mini DIN (VISCA IN, VISCA OUT/RS485) Controller Signal Interface: Dip-switch Pin 7/TTL Signal; Baud Ratio: 9600/ 38400 bps Power supply interface: DC 12V 2A Electrical Index Power supply adapter: 12V DC/2A Input voltage: 12V DC(10.5-14V DC) -
Page 5: Front View
Rear Board & function 1 Front View Lens Adopted 10x optical auto focus lens IR Receiver To receive IR mote controller signal LED Power LED LED Blinking when power plug in, Blue color Led Stand by LED LED blinking while shut down camera use remote controller, and Orange color IR Receiver To receive IR mote controller signal LED 5 / 26... -
Page 6: Rear View Of Camera
2 Rear view of camera Power switch Power on/off button DC IN 12V socket Working with power adaptor along with Camera IR Receiver When use one remote control to operate three cameras, this switch will decide which camera you’re operating. VISCA IN port When connect multi cameras to PC via RS-232C (VISCA IN), use serial cable connect VISCA OUT of the first camera to VISCA IN of the second camera. -
Page 7: Dip Switch Settings
3 Bottom of Camera Tripod screw hole When install the camera onto tripod, use these screw holes to fix on tripod. Dip-switch Used for select baud rate and remote signal output switch. 4 Dip-switch Settings Dip-switch 1(Set Communication baud rate) ON=>38400bps, OFF=>9600bps (Please set the baud rate before turn on power. - Page 8 Dip-Switch 2(Set Control protocol) ON: RS-485 &PELCO-D (ON=RS485&Pelco-D) OFF: RS-232C&VISCA (OFF=RS232C &VISCA ) Dip-Switch 3 (Set as Upgrading) Set dip switch 3 as ON, then you can do upgrading of the camera, Must Set OFF as usual working. Dip-Switch 4& 5 (Set address code) When you used RS232C &VISCA to control multi-cameras, suggest to set address code as OFF;...
- Page 9 VISCA RS-232C IN Pin S/N Function DTR IN DSR IN TXD IN RXD IN IR Commander Signal OUTPUT NO Connection VISCA Out Reference Pin S/N Function VISCA RS-232C OUT DTR OUT DSR OUT TXD OUT RXD OUT RS-485 RS-485 Camera to PC connection Camera Computer 25 Pin 1.
- Page 10 Camera Cascade Camera“A” Camera“B” VISCA OUT VISCA IN 1. DTR OUT 1. DTR IN 2. DSR OUT 2. DSR IN 3. TXD OUT 3. TXD IN 4. GND 4. GND 5. RXD OUT 5. RXD IN 6. GND 6. GND 7.
-
Page 11: Menu Parameters
Dome OSD Press “DOME OSD” &PAN SPEED button on remote controller to TILT SPEED display: SCAN SPEED TOUR PATH Chose OSD menu TOUR DWELL Move by PROPORTION Parameters AUTO REV Chose by FRAME 60HZ Values Display OSD parameters, chose by to change the parameters value of menu OSD Menu Parameters:... - Page 12 Note: 60Hz mode, 1080p30 camera output as default, support 1080p@30/25/20/15/10/5, 720p, 800x600, 640x480/60/50/30/25/20/15/10/5; 50Hz mode, 1080p@25 camera output as default, support 1080p@25/20/15/10/5, 720p, 800x600, 640x480/50/25/20/15/10/5; LENS OSD LENS OSD Access from remote controller, there is OSD menu display on screen and its possible to adjust or change any settings of lens OSD. (Up/down direction key to change the menu, left/right direction key to change the parameters value) &DISPLAY...
-
Page 13: Ir Remote Controller
R GAIN (RED RAIN) Shutter speed range: Default value: 206 1/1—1/10000 Adjustable scope: 0~255 IRIS B GAIN (Blue Gain) Default value: Close Default value: 150 Close/F1.4-F22 Adjustable scope 0~255 BRIGHT AE (Auto Exposure) Default value: 0 Default value: Auto 0 ~ 31 AUTO/MANUAL/SHUTTER/IRIS/ BRIGHT SHUTTER SPEED... - Page 14 5. Pan/tilt Control : move up : move down : move left : move right : auto Pan moving 6. Additional Function zone Freeze: image freeze BL: Backlight compensation WB: White Balance AE: Auto Exposure D zoom: Digital Zoom HDMI: swap to HDMI Video output DVI: Swap to DVI video output Format: swap between different...
- Page 15 Far: focus at far distance objects Near: focus at near distance objects 11. Pan/Tilt Function Zone L-Limit: Set Left limit Scanning position Scan: Enable Boundary scanning R-Limit: Set Right limit scanning position Home: Camera Home position Tour: Enable Patrolling Rev: Image auto-flip Remote controller Function Summary Regional Keynote...
- Page 16 Move camera up-side Move camera down-side Pan/Tilt control Move camera go left Move camera go right Enable Pan movement scanning Image Freeze Backlight compensation White Balance Auto Exposure Auxiliary Digital Zoom Swift as HDMI Video output (not available with this camera) Swift as DVI Video output (not available with this camera) Swipe different video formats...
- Page 17 Login Lens OSD Menu Zoom in slowly speed Slow speed Zoom in/out Zoom out slowly speed Auto focus automatically Manual focus Lens Focus adjustments Lens zoom in far end Lens zoom in Near end Set Left points for boundary scanning Enable Scanning automatically Set Right limit point for Boundary scanning...
-
Page 18: Special Preset Positions Function
Operation instruction Joy-stick PTZ Keybaord operation To use joy-stick PTZ keyboard to control Camera including, pan/tilt/zoom movement, set Tour scanning, enable boundary scanning, etc. option function turn up Down-side movement turn down Up-side movement turn left Left movement turn right Right movement Rotate left Zoom in... - Page 19 Amcap Software application Open the CD-ROM AMCAP v3.0.9.exe software, choose Devices->USB video equipment (or similar options), then chose “preview”, as shown in the diagram below, you can preview image. Before Preview Video output, please check Capture-> 19 / 26...
- Page 20 Adjust different video format 60Hz mode, camera output 1080p30 as default, support 1080p@30/25/20/15/10/5, 720p, 800x600, 640x480/60/50/30/25/20/15/10/5; 50Hz mode, camera output 1080p@25 as default, support 1080p@25/20/15/10/5, 720p, 800x600, 640x480/50/25/20/15/10/5; The Camera upgrade (control) Installed in the CD setup.exe software, completed after running HD Camera Debugger.exe open interface as shown in figure: Select Baudrate, Protocol, port, immediately after the completion of the camera control If you need to upgrade the camera program, through the "import...
-
Page 21: Specification Sheet
upgrade progress bar is complete, the camera upgrade is complete, the automatic restart. Specification sheet Model No. HD820-U30-SN6300/K3 Image Sensor 1/2.8" Type Exmor CMOS Effective Pix 3.27 Megapixel Min. Illumination 0.1Lux Image White balance Auto/Manual Sensor Gain control Auto/Manual B/L compensation On/Off Shutter speed 1/1 - 1/10,000S... - Page 22 Focus f=4.7-90mm F1.6-3.5 Iris Auto/Manual Lens Lens 20 Optical x 12 digital zoom Horizontal view 55.4 angle Video output USB 3.0 Video output Signal system YUY2 | 1920x108030p, 1280x 720 30p Control terminal EIA/RS232C,EIA/RS485(Bidirectional) Control Protocol VISCA,PELCO-D baud rate 9600/38400bps patrol line 4 cruise sequence preset position...
-
Page 23: Installation Instruction
Installation instruction Desktop Installation Put the camera on the desk flat, and make sure the camera in level. If wan to put the camera on oblique surface, please make sure the angle of inclination less than 15 degree for ensure camera pal and tilt working in normal operation. Tripod Installation Twist the tripod’s screw on the camera tripod hole, then the tripod could be installed on the bottom of camera. -
Page 24: Ceiling Mount
Ceiling Mount Step 1: Fixed the quadrate bracket onto ceiling Ceiling Quadrate brackets Use screws to fixed the quadrate brackets onto ceiling, four raised parts face to ceiling. Step 2: Fixed the Use the screws to fix the Slotted screws deltaic bracket. - Page 25 Step 3: Connect the deltaic bracket to quadrate bracket. Use hand prop the camera, let the slotted screw nut through the groove of quadrate bracket. Step 4: Lock the screws. Use the screws to lock the quadrate Lock screws and deltaic brackets to finish the installation.
-
Page 26: Troubleshooting
PC. (Reference to camera to PC. connection.) Pull up the power, and wait a The camera is not few minute to connect power working completely. again. Or power off the camera, then restart after a moment. Contact: (800) 486-5276 26 / 26 www.HuddleCamHD.com...
Need help?
Do you have a question about the HD Color Video Camera and is the answer not in the manual?
Questions and answers