Table of Contents
Advertisement
Attach the Input Paper Shelf and Output Basket - Pedestal Model
|
1. Squeeze the paper support tabs and slide the two paper supports toward
2. Place the output basket in the holes in the back of the printer.
3. Screw the ground wire attached to the output basket to the printer.
4. Squeeze the wire form back stop and place it between the wire frames of
|
|
|
5. Place the input paper shelf (optional feature) in the holes in the front of
46
Infoprint 6500 Quick Start Guide
the center of the support shaft. Position them so that they divide the space
between the tractors into three approximately equal segments.
the output basket.
Note: The wire form back stop helps to hold the printed paper in place.
the pedestal base.
Advertisement
Table of Contents
