Icom iC-m34 Service Manual page 7

SECTION 3
1. Removing the Front panel
• Unscrew 4 screws A, and remove the rear panel from the
Front panel.
A
Rear panel
Front panel
2. Removing the Chassis
q Unscrew the antenna nut.
w Disconnect the speaker cable from the MAIN UNIT.
e Take off the chassis from the front panel inthe direction
of the arrow.
Speaker cable
Antenna nut
Front panel
DISASSEMBLY INSTRUCTION
A
MAIN UNIT
3 - 1
3. Removing the MAIN UNIT
q Unsolder 2 points B (Bottom side).
w Unsolder 1 point C (The core of the antenna connector).
e Unscrew 7 screws D, and remove the chassis from the
MAIN UNIT.
B
C
D×7
(Bottom side)
CHASSIS