Key To Symbols - Husqvarna K750 Operator's Manual

KEYTOSYMBOLS
Key to symbols
WARNINGI The machine can be a
dangerous tool if used incorrectiy or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefullyand make sure you understand
the instructions before using the machine.
Always wear:
• Protective helmet
• Hearing protection
• Protective goggles or a visor
• Breathing mask
This product is in accordance with
applicable EC directives.
WARNINGI Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNINGI Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
Noise emission to the environment
according to the European Community's
Directive.The machine's emission is
specified in chapterTechnical data and on
label.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Alwayswear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
2 - English
<®>
Run position.
Stop, with the return spring to the operating
position.
Stop, in the fixed position.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.