Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna TS60 US Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

Symbols on the machine

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's
manual carefully and make sure
you understand the instructions
before using the machine.
Always wear:
Hearing protection
Protective goggles or a visor
Breathing mask
Warning! Never cut without using the blade
guard.
Warning! Keep your hands and feet away from
the blade.
Warning! High voltage. Risk of an electric
shock.
Do not expose for rain.
Environmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic
waste. It must instead be submitted to an
appropriate recycling station for the recovery
of electrical and electronic equipment.
By ensuring that this product is taken care of
correctly, you can help to counteract the
potential negative impact on the environment and people that
can otherwise result through the incorrect waste
management of this product.
For more detailed information about recycling this product,
contact your municipality, your domestic waste service or the
shop from where you purchased the product.
2 –
English

KEY TO SYMBOLS

Other symbols/decals on the machine refer to special
certification requirements for certain markets.

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
NOTICE! Used if there is a risk of damage to materials or
the machine if the instructions in the manual are not
followed.
WARNING
"WARNING For Your Own Safety Read Instruction Manual Before Operating Saw
a) Wear eye protection.
b) Use splash hood for every operation for which it can be used.
c) Disconnect saw before servicing, when changing cutting wheels, and cleaning.
d) Use tool only with smooth edge cutting wheels free of openings and grooves.
e) Replace damaged cutting wheel before operating.
f) Do not expose to rain or use in damp location.
g) Risk of injury due to accidental starting, do not use in an area where children
may be present
Equipment is furnished with a 3 wire groundingplug. Be certain equipment is
connected to a grounded circuit. Failure to comply could result in death or
serious bodily injury. See operator´s manual for instructions. If you do not have
an operator´s manual, call toll free 1-800-288-5040
WARNING! Used if there is a risk of serious
!
injury or death for the operator or damage to
the surroundings if the instructions in the
manual are not followed.
CAUTION! Used if there is a risk of injury to
!
the operator or damage to the surroundings
if the instructions in the manual are not
followed.

Advertisement

Table of Contents
loading

Table of Contents