Recording - Samsung 650 User Manual

I
o
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Operating Status
Available Buttons
After switching to the device, when the Numeric buttons
menu of the corresponding device is
./T/"'/~/ENTER~
buttons
Anynet+ Device
displayed on the screen. Color buttons I EXIT button
-
After switching to the device, while c=J(Backward search) I c=J(Forward search)
~(Stop)
I
playing a file
c:J(Play) I C'J(Pause)
Device with
After switching to the device, when you
CH R I B button
builtin Tuner are watching a TV programme
Audio Device When Receiver is activated
VOL
[<]
I C:::J
button
---_._._--
14: MUTE button
-_._----_
..
_._._~--~----------_
.. __ .....
_._-_._--_."
..
@' )
The Anynet+ function only works when the active source on the TV remote control is set to TV.
@' )
The ~ button works only while in the recordable state.
@' )
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
@' )
The TV remote control may not work under certain conditions. In this occurs, reselect the Anynet+ device.
@' )
The Anynet+ functions do not operate with other manufacturers' products.
The c=J, c=J operations may differ depending on the device.
Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the
ENTER~
button to select Anynet+ (HDMI-CEC).
2. Press the. or T button to select Recording(recorder): then press the ENTER
~
button. Recording begins.
@?]
When multiple recording devices are connected, the recording devices are listed.
Press the • or T button to select a recording device and press the ENTER
~
button. Recording begins.
@' )
When the recording device is not displayed, select Device List and press the red
button to search devices.
@' )
Pressing the
~
button will record whatever you are currently watching. If you are
watching video from another device, the video from the device is recorded.
@' )
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
a recording device.