Samsung 650 User Manual page 66

Wireless Network Setup
Security Key
A B C 0 E F G NL;rnbl.:r
H I J K L
M
N
Lowerc;,c;e
•
Dele!!::
0
P Q
R
S
T
U DOile
V W X Y Z
• Select a network
Access Point: You can select the IP sharer to use when using a wireless network.
rEI
If a wireless network is not in the Select a network list, press the Red button.
rEI
When the connection is made, you will be returned to the screen automatically.
rEI
If you have selected an Access Point with a security authentication:
The Security Key input screen appears. Enter the security key and press the Blue
button on the remote control.
rEI
If security encryption type is WEP, 0-9, A-F will be available when you input
security key.
<.
r~1ove '. Number .- En!er '_, Return
Button
./T/"'/~
ENTER
-------------- ---+
Red button
Operations
Moves the selection up/downlleftlright.
Enters (Inputs) the selected character.
Switch between Upper- and Lower-Case Letters
----f-------------------------------------------------
Green button
Blue button
You can delete an already entered character.
this button to finish entering the security key.
o
Connecting WPS (Wi·Fi Protected Setup)
If Security Key is already set: In access point list, select WPS.
rEI
You can select PBC, PIN, Security Key.
Connecting by using PBC: Select a PBC (Push Button Configuration). Press the
PBC button on the AP (access point) within 2minutes, and wait for connection.
• Connecting by using PIN: Select a PIN (Personal Identification Number).
rEI
The message showing the PIN Code is displayed. Input the PIN Code at AP
device within 2minutes. Select OK and wait for connection.
rEI
Try again if connecting operation doesn't work
rEI
When the connection is not established although tried again, reset the access
point. Please refer to a manual of each access point.
• Connecting by using Security Key: When selecting Security Key, the input
window is displayed. Input the security key and press Blue button.
rEI
Try again if connecting operation doesn't work.
If Security Key is not set: When the security setting of AP that supports WPS
is NONE, you can select PBC, PIN, None Security. None Security is capable of
connecting to AP directly without using WPS function.
rEI
Process of PBC, PIN is same as above. Refer to if Security Key is already set.
rEI
Try again if connecting operation doesn't work.
P·ess the PBC bu:tor on the access ao,n!
Access POint Name AP_3
~
Press OK After Input TV
S
P,ncode In the access
pOint s setup
Access POint Name AP 3
PIN Code 12345678
~
Cancel