Lighting The Grill - Igloo IGW 400 Assembly And Operating Instructions Manual

4 burner stainless steel gas grill
Table of Contents

Advertisement

including valve connections, hose connections, and regulator connections.
Step 4- If bubbles form over any of the joints there is a leak
Turn off the gas
Retighten all joints
Repeat test
If bubbles form again, do not use the grill and contact your gas supplier or fire department for assistance.
Hose
Regulator
Test
Cylinder

LIGHTING THE GRILL

1.
Main Burners-Open the hood of your grill. Never light your grill with the hood closed. Turn the gas cylinder valve
to the 'on' position. Push the center control knob in, on the burner you wish to light, and turn knob to the HIGH
position. Fully depress the igniter button, hold for 5 seconds to light the burner. Once burner is lit the burner next to
it will light by turning the knob to "HIGH", making sure each burner is alight before lighting the next. IF ANY
BURNER FAILS TO LIGHT, TURN OFF THE GAS AT THE BURNERS AND THE CYLINDER, WAIT 5
MINUTES AND TRY AGAIN. If the burners c
instructions under important information.
2.
Once the burners are lit, turn all the main burners to the HIGH setting for 3-5 minu
should be done before each session. When pre-heating is complete, cooking can begin.
4. T
o prevent food
sticking,
cooking grids before each grilling session.
5. S
ide Burner-Open the lid of the side burner. Never light the side burner with the lid closed. Turn the gas cylinder
valve to the 'on' position, Push the side burner control knob in and turn it to the high position and fully depress the
igniter button (On the main control panel) and hold for 5 seconds to light the burner.. IF THE BURNER FAILS
TO LIGHT, TURN OFF THE GAS AT THE BURNER, WAIT 5 MINUTES
cannot be lit using the ignition system, turn to the manual lighting instructions.
OFF
Valve&Manifold
Assembly
Side
Valve
Test
an not be lit using the ignition system, turn to the manual lighting
we recommend tha
t you use a long handled brush to apply a light coat of cooking oil to the
HIGH
Main Burner
Hose
LOW
19
Test
tes to pre-heat the grill. This
AND TRY AGAIN. If the burner

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bb10514a

Table of Contents