Rotisserie Assembly; Using Rotisserie - Igloo IGW 400 Assembly And Operating Instructions Manual

IMPORTANT: Before installing Rotisserie, you must remove the Warming Rack (7). DO NOT leave
Rotisserie Motor (19) on the grill during when not in use.
1. Install Motor (19) by sliding it down onto the Motor Support (21).
2. Insert the pointed end of the Motor Pole assembly into the crank housing of the Motor (19), as
shown.
3. Rest the handle side of the rotisserie in the grove of the Grill Body (8), as shown.
Note: The Pole Restrictor (27) must be adjusted so that it rests in the grove of the grill body. The
Wing Nut (24) should be OUTSIDE the Grill Body (8), as shown.

Rotisserie Assembly

19
23
21
26
24

Using Rotisserie

Assembling the Motor Pole (Spit)
20
25
1. Identify the Motor Pole A (20) and
Motor Pole B (21).
2. Slide one Fork (23) onto Motor Pole A
(20), as shown.
27
3. Attach Motor Pole Coupling (26) to
Motor Pole A (20).
4. Attach Motor Pole B (21) to Motor Pole
Coupling (26).
5. Slide remaining Fork (23) onto Motor
Pole B (21), as shown.
6. Remove plastic covers from forks
before use.
Note: Restrictor Screw should be oriented
TOWARDS the Handle (25), as shown
17