Table of Contents
Advertisement
2
|
Install the Sensor
There are three different options to mount the Sensor. Proceed to
the section that matches the type of mounting location you will be
using, as follows:
cable routed
through the hole
cable routed
to the side
Stem Mount with 1" - 14 Thread
The Sensor will be mounted on a
stem or antenna pole. Proceed to
Section A.
stem
Deck Mount with Access Under the
Mounting Location
The Sensor will be deck mounted
and the cable can be routed down
through the mounting surface.
Proceed to Section B.
Deck Mount with NO Access Under
the Mounting Location
The Sensor will be deck mounted
and the cable routed to the side
because there is not space for a
cable through or underneath the
mounting location. Proceed to
Section C.
6
Installation Overview
Advertisement
Table of Contents
