User Information; Bike Setup - STAR TRAC FITNESS Spinner Blade User Manual

8 ,
6(5 1)250$7,21

BIKE SETUP

Proper bike setup gives you a more comfortable ride and reduces your risk of injury.
HANDLEBAR HEIGHT
Position the handlebar at the same height as your seat, or higher if you feel any discomfort in your back.
FOOT POSITION
Place the balls of your feet securely in the toe cages, with the ball of the foot (or the widest part of your shoe) over the center of the pedals. As you pedal,
concentrate on keeping feet flat, which enables a more powerful pedal stroke. The front of the shoe may not completely fill the toe cage.
RESISTANCE CONTROL
Pedaling resistance is controlled by the Push Brake System knob located below the handlebar. Resistance adjustments can be made while riding to vary
the intensity of your workout. To increase resistance, turn the Push Brake System knob clockwise (+); to decrease resistance, turn the knob
counterclockwise (-).
3DJH 
SEAT FORE-AND-AFT
POP-PIN
SEAT HEIGHT
POP-PIN
SEAT HEIGHT
At the proper height, there should be a slight bend in your knee when you're at the
bottom of a pedal stroke.
FORE/AFT POSITION
Once the proper height has been achieved, adjust the seat forward or back so that when
the feet are in the 3 o'clock and 9 o'clock positions, the forward knee is directly over the
pedal axle. Recheck the seat height again after making the fore/aft adjustment, as
moving the seat forward and backward can have the same effect as moving it higher or
lower.
63,11(5 86(5·6 0$18$/
Š
B