Install The Blower; Install Light Bulbs; Reinstall Grease Drip Rail And Baffle Filters - Broan E60000 SERIES Installation Instructions Manual

15. INSTALL THE BLOWER

Refer to instructions included with blower.
Plug the 3-prong plug cord from rough-in plate to the 3-prong male connector inside the
hood (A) and the 2-prong male connector cord from rough-in plate to the 2-prong plug
inside the hood (B).
Do not plug the 2 cords together.

16. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS

Reinstall grease drip rail. The illustration at right shows how to reinsert the grease drip rail
into the range hood.
Remove protective plastic film covering filters before installing them.
NOTE: Assemble the metal handles to the filters,
using provided no. 8-32 x 1/4" screws, before
installing them in the hood.
It is recommended to install side filters first and
finish with center one(s).
1. Insert one end of the filter into the upper channel
of the hood.
2. Raise the other end toward the inside of hood
and insert in the grease drip rail of the hood.

17. INSTALL LIGHT BULBS

This hood requires 50 W max., 120 V with GU10 base, shielded halogen bulbs (not included). (2 required for 30" and 36" hood widths or
3 for 42" and 48" hood widths.)
Do not touch lamps during or soon after operation. Burns may occur. In
order to prevent the risk of personal injury, only install shielded halogen
lamps. Also, never install a cool beam, a dichroïc lamp, a lamp not suitable
for use in recessed luminaires or identified for use in enclosed fixtures.
1. Install bulbs by placing the bulb leads into their grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove bulbs, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
(EXTERIOR OR IN-LINE BLOWER)
WARNING
!
CAUTION
1
HD0245
WARNING
!
HE0078
12
B
HD0244
2
1
HO0090
A
2