The electronic timer displays the time and the timer
function with countdown.
Note: all the functions are operative approximately 7
seconds after they are stet.
How to reset the clock
After the appliance has been connected to the power
supply, or when the power has gone out, the clock display
will automatically reset to 0:00 and begin to blink. 0 00
•
Press the
button, and then use the
buttons to set the correct time. To move the time
forward quickly, keep the buttons pressed.
Whenever the time must be reset, follow this same
procedure.
Electronic timer
Timer Feature
Press the
" " will appear on the display. Each time you press button
, the time will increase by 10 seconds until 99 minutes
and 50 seconds. If you continue to press it, the time will
increase from minute to minute up to a maximum of 10
hours.
Use button
After setting the desired time, start the countdown. When
and
the time has elapsed, the buzzer will sound, and it can be
interrupted by pressing any of the buttons.
You can display the time by pressing button
" " indicates the timer function has been set. After
approximately 7 seconds, the display automatically goes
back to indicating the timer.
To cancel a previous setting
Press button
11
button to access this function. The symbol
to go backwards.
up until 0 • 00.
, and symbol