Table of Contents
Advertisement
Password (Free Format Blind Text, 13)
This is an optional field. If you enter a password here, then the user will be
requested to confirm it prior to a connection being allowed to take place.
User prof (Free Format Text, 15)
This is an optional field. It contains a user profile number or name. If this
service is selected automatically (i.e. by incoming LAN call's TCP port
matching the above TCP port), then the user connection (originator
Router) will adopt the characteristics of this user profile. If no profile is
specified, then the default user profile will be used.
Service prof (Free Format Text, 15)
This is an optional field. It contains a service profile number or name.
When this service is selected, then the session created will adopt the
characteristics of this service profile. If no profile is specified, then the
default service profile will be used.
Service Type (Constrained List)
This field selects whether the service is specifically for a printer on a WAN
connection. The settings are:
NORMAL
PRINTER
HELD PRINTER
Printer timeout (Free Format Test, 4)
The number of seconds for which a call to a Held Printer WAN Service type
will be held 'open', with no LAN user.
X870-300351 Issue 1
This is the default selection setting for (multi-user) WAN
services.
This setting indicates that the service can only be used by
one LAN user at a time. It is particularly appropriate for
connections to printers attached to the WAN. A LAN user
requesting this service will not be connected unless the
WAN service is ready to accept the incoming call.
As PRINTER but when a LAN user disconnects, the WAN
half of the call is kept active (i.e. ''held''). A subsequent
LAN user connecting to this service is instantly connected
to the WAN connection, saving WAN call set-up time. A
held printer service will disconnect after the number of
seconds given in Printer timeout if no LAN user re-
connects.
4-33
Rev.0
Advertisement
Table of Contents
