Break Map (Constrained List)
This field indicates whether Break is to be transmitted by Router, and
selects the TELNET character that is to be used to indicate a Break
character on the LAN.
– Translate WAN Break to TELNET BREAK
BREAK
– Translate WAN Break to TELNET INTERRUPT-
INTERRUPT
– No Break character sent to WAN or LAN.
DISABLED
4.4.4.3 Configure Service Profiles Menu (
command)
Router : Watford
--------------------------------------------------------------------------------
-----------------
|
1
|
default
-----------------
-----------------
|
5
|
-----------------
ED - Edit
--------------------------------------------------------------------------------
PF2 - Help
--------------------------------------------------------------------------------
(conf sp) Enter action:
This menu displays eight profiles at a time. When a profile has a name,
that is also displayed; if not, only the number is shown.
You can specify an action to be carried out on a service profile. Once
selected, you are prompted to specify the profile(s) required.
The edit action requests a single profile, and enters the configure service
profile form. The copy action requests two profiles, a source profile and a
destination profile: the contents are then copied (except the name). The
clear action requests a single profile and then clears the profile to the
initial default values.
X870-300351 Issue 1
PROCESS
CONFIGURE SERVICE PROFILES MENU
-----------------
|
|
2
|
|
-----------------
-----------------
|
|
6
|
|
-----------------
CO - Copy
^B - Prev page
^N - Next page
conf prof serv
-----------------
|
|
3
|
|
-----------------
-----------------
|
|
7
|
|
-----------------
4-20
or
conf sp
Rel x.y
-----------------
|
|
4
|
|
-----------------
-----------------
|
|
8
|
|
-----------------
CL - Clear
PF4 - Main Menu
PF3 - Prev Menu
|
|
|
|
Rev.0