Case 8000 Series Reference Manual page 145

Router : Watford
-------------------------------------------------------------------------------
Name : Stock
X.121 Address
Internet
Address
Password
User Prof
-------------------------------------------------------------------------------
PF2 - Help
PF1 - Submit
-------------------------------------------------------------------------------
This service makes use of an X.121 address to route STOCK calls from X.25
to the LAN.
Once all these items have been configured, then the services should be
enabled (
en lan DevSys, en lan Sales, en lan Stock
The above configuration allows the development staff to contact X.25 and
simply enter the service name
them to the development system over the Ethernet network. Warehouse
staff also follow the same procedure using the
case they will be connected to the commercial system and logged in as
STOCK.
The sales staff contact the WAN and enter the
automatically routes them to the SALES service on the commercial
system. They may then enter
into dialogue with Router, which then requests that they enter a service,
e.g. STOCK. Upon entering
service while leaving the SALES service available on session 1. The user
can then switch between service by pressing
for STOCK.
X870-300351 Issue 1
CONFIGURE LAN SERVICE FORM
: 11000017050
: 1.1.1.2
:
: Seamless
DEVSYS
ESC PF4
STOCK
Sub-Address
TCP Port
Service Prof : Stocklogin
).
, which then automatically connects
STOCK
SALES
on the keyboard. This brings them
, TGate connects them to the STOCK
ESC PF1
E-9
REL x.y
: 01
: 23
^R - Restore
^C - Abort
service name; in this
service name. This
for SALES and
ESC PF2
Rev.0