Case 8000 Series Reference Manual page 2

The 8325/8425/8525 basic units have a removable dress panel fitted
to the front of the unit and removable blanking plates fitted at the
rear.
personnel for installation or maintenance purposes, and must be
replaced afterwards.
would invalidate the RFI (Radio Frequency Interference) and safety
type approvals.
Case Communications Limited has made all reasonable efforts to ensure the accuracy of the content of this document but the
information contained herein does not constitute a warranty of performance of the equipment and/or software described and no
specifications given form part of any contract. This document does not constitute a licence to use or copy any software described
herein and any such software must only be used in accordance with the terms of the licence supplied therewith.
Case Communications Limited reserves the right to make alterations to the equipment and software described without notice and
assumes no liability for any loss or damage caused as a result of use of this document whether because of out of date or inaccurate
information or otherwise.
Product and manufacturers' names referred to in this document are used for identification purposes only and Case Communications
Limited acknowledges the intellectual property rights of their respective owners in the same
This document is the copyright of Case Communications Limited and may not be reproduced, copied or stored in any computerised
retrieval system by any means whatsoever without the express written permission of Case Communications Limited.
Published by Case Communications Technical Publications Department
X870-300351 Issue 1
STATUTORY NOTICES
These panels may only be removed by suitably qualified
Removal under any other circumstance
WARNINGS
0-2
.
Rev.0