Table of Contents
Advertisement
Refresh Sequence (Free Format Text, 9)
This field is optional. It may contain embedded control characters. This
string will be sent to the service whenever the service is selected
(excluding initial connection).
CR/LF mapping (Constrained List)
Four fields are provided to select CR and LF character mapping to and from
X.25. Each field can be set to one of the following settings.
-
CR
-
LF
-
CR LF
-
CR NULL
-
CR NULL LF
-
NOTHING
Service will Echo (Constrained List)
This field selects whether an Echo option is negotiated by TELNET.
– TELNET Echo option negotiated
YES
– TELNET Echo option not used
NO
Suppress Go-Ahead (Constrained List)
This field selects whether a Suppress Go-Ahead TELNET option is sent. It
is only used when the service connection is on the LAN.
SUPPRESSED
NOT SUPPRESSED
Binary (Constrained List)
This field selects whether the TELNET Binary option should be
negotiated. It is only used when the service is on the LAN. With Binary
mode enabled, the connection is requested to use a full 8-bit data path.
With Binary mode disabled, standard TELNET ASCII connection (7-bit
data path) is established.
– TELNET Binary option negotiated
ENABLED
– TELNET Binary option not used
DISABLED
Local X.3 Parameters (Constrained List)
This field selects whether the local X.3 parameters are used when
processing packets.
- Process packet using X.3 parameters
ENABLED
- Ignore X.3 parameters and forward packet immediately
DISABLED
X870-300351 Issue 1
map to CR
map to LF
map to the sequence CR LF
map to the sequence CR NULL
map to the sequence CR NULL LF
map to NOTHING
– Enable the use of Suppress Go-Ahead.
– Disable the use of Suppress Go-Ahead.
4-22
Rev.0
Advertisement
Table of Contents
