Activity Camera Setup - Dedicated Micros Digital Sprite Lite Setup Manual

Activity Camera Setup

Activity detection is used to record more images to disk from cameras that have
activity. The sensitivity of activity can be adjusted and areas can be masked off
according to the scene type.
Activity Camera Set-Up Detection Off
Sensitivity Outdoor high
Activity Grid Setup
Activity Test Walk test
Detection
Select whether activity detection is on or off for the selected camera.
Sensitivity
There are 5 levels of sensitivity for activity detection.
Select the sensitivity level which matches the camera's placing. Cameras sited
outdoors where there may be a lot of background movement, such as trees or
rain, should be set to Outdoor high or Outdoor low sensitivity. Cameras sited
indoors where there is very little background movement should be set to Indoor
high, Indoor low, or very low sensitivity.
Activity grid
An 8 x 16 grid is used to mask areas where activity detection is enabled. When
the grid is displayed, use the cursor keys to move the cursor to the desired
location and press a camera key to toggle the block on (white dot) or off.
20
On
Outdoor low, very low, Indoor high, Indoor low
Activity test
Use this option to test and tune the sensitivity and activity grid set up for each
camera. When activity is detected on the camera a white dot is displayed. Press
the mode or menu key to exit the test.
Activity detection can perform the following:
Action
Close/Open relay 2
Automatically copy the activity to Zip® or Jaz®
Display the activity camera on screen
Change the record rate
Record exclusively or interleave the activity cameras
Menu page
Activity Setup
Activity Setup
Activity Setup
Record Schedule
Record Schedule