Camera Viewing; Schedule - Dedicated Micros Digital Sprite Lite Setup Manual

Camera Viewing

An option is available to view all cameras or selected cameras. All the cameras are
viewed by default. Cameras removed from viewing do not affect the cameras
being recorded.
To change the cameras to be viewed
• Press the ' ' cursor key to change the edit field to 'Selected cameras'.
• A menu will display the cameras to be viewed.
• Press the camera key to toggle the camera in or out of the viewed sequence.
This camera will be displayed. A filled box denotes cameras that can be viewed.
Note: Cameras removed from view are not displayed on the main or spot monitor
in live or playback mode, multiscreen displays will show a blank segment.
Tip: It is advisable to set a password to stop this setting being altered by
unauthorised personnel.

Schedule

A schedule can be used to record selected cameras at different times, change the
record rates, and select whether alarms or activity is enabled.
Night Off
Set/Unset Direct
Module 01 contact 01
On between 18:00 and 09:00
Weekend Off
Set/Unset Direct
Module 01 contact 01
On between Friday
Monday
The schedules have three options:
• Off – the schedule is disabled
• Set/Unset – use a switch or alarm input to trigger the schedule. This is
connected directly to the AUX input, or by using a specific contact on an
external alarm module.
• On between – the schedule is triggered between user defined times (and days
for the weekend schedule).
The schedule gives the option to switch to night and weekend settings, either
manually using the Set/Unset option, using either the AUX input or alarm
contacts, or automatically at pre-set times and days.
Note: The Weekend setting overrides any night settings during the defined
weekend period.
18:00
09:00
13