PIN code request
•
your PIN or UPIN code every time the device is switched on. Some SIM cards
do not allow the code request to be turned off.
PIN2 code request
•
using a specific device feature which is protected by the PIN2 code. Some
SIM cards do not allow the code request to be turned off.
Call barring service
•
your device (network service). A barring password is required.
Fixed dialling
•
if this function is supported by your SIM card. When the fixed dialing is on,
GPRS connections are not possible except while sending text messages over
a GPRS connection. In this case, the recipient's phone number and the
message center number must be included in the fixed dialing list.
Closed user group
•
who can call you (network service)
Security level
•
whenever a new SIM card is inserted into the device. If you select Memory,
the device asks for the security code when the SIM card memory is selected,
and you want to change the memory in use.
Access codes
•
or barring password
Code in use
— to select whether the PIN code or UPIN code should be active
•
Authority certificates
•
authority or user certificates downloaded into your device. See
"Certificates," p. 87.
Security module settings
•
Module PIN
request, or change the module PIN and signing PIN. See "Access
codes," p. 11.
Software updates over the air
Warning: If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is completed and
and
UPIN code request
— to select whether the PIN2 code is required when
— to restrict incoming calls to and outgoing calls from
— to restrict your outgoing calls to selected phone numbers
— to specify a group of people whom you can call and
— Select
Phone
— to change the security code, PIN code, UPIN code, PIN2 code,
or
User certificates
— to view
— to set the device to ask for
to set the device to ask for the security code
— to view the list of the
Security module
S e t t i n g s
details, activate
61