Timers
Countdown timer
1. To activate the countdown timer, select
Normal
timer, enter the alarm time, and write a note that is displayed when
the time expires. To change the countdown time, select
2. To start the timer, select Start.
3. To stop the timer, select
Interval timer
1. To have an interval timer with up to 10 intervals started, first enter the
intervals.
2. Select
Menu
3. To start the timer, select
Stopwatch
You can measure time, take intermediate times, or take lap times using the
stopwatch. During timing, the other functions of the device can be used.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select
Menu
>
Split timing
•
select Start. Select
time. To stop the time observation, select Stop. To save the measured time,
select Save. To start the time observation again, select
new time is added to the previous time. To reset the time without saving it,
select Reset.
Lap timing
— to take lap times
•
Continue
— to view the timing that you have set in the background
•
Show last
— to view the most recently measured time if the stopwatch is
•
not reset
View times
or
•
Stop
Organiser
>
>
Start timer
Organiser
Stopwatch
>
— to take intermediate times. To start the time observation,
Split
every time that you want to take an intermediate
Delete times
Menu
timer.
Timer
Interval
>
> Start.
and from the following options:
— to view or delete the saved times
O r g a n i z e r
Organiser
>
>
Change
timer.
Options
> Start. The
Timer
>
time.
81