Usb Data Cable; Call - Nokia 3110 classic User Manual

To use a remote internet server, subscribe to a synchronization service. For
more information and the settings required for this service, contact your service
provider. You may receive the settings as a configuration message. See
"Configuration setting service," p. 12.
To start the synchronization from your device, select
Connectivity
>
Synchronizing for the first time or after an interrupted synchronization may
take up to 30 minutes to complete.

USB data cable

You can use the USB data cable to transfer data between the device and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the device for data transfer or image printing, connect the data
cable. Confirm "USB data cable connected. Select
following options:
Nokia mode
•
Printing & media
•
or with your compatible PC
Data storage
•
use the device as a data storage device
To change the USB mode, select
data cable and the desired USB mode.

Call

Select Menu
>
Call divert — to divert your incoming calls (network service). You may not
•
be able to divert your calls if some call barring functions are active. See
"Security," p. 60.
Voice clarity
•
noisy environments.
Data transfer
— to use the cable for PC Suite
— to use the device with a PictBridge compatible printer
— to connect to a PC that does not have Nokia software and
Settings Call
>
— Select Active
Server sync.
>
Menu Settings
>
and from the following options:
to enhance speech intelligibility especially in
Menu Settings
>
mode." and select from the
Connectivity
>
S e t t i n g s
>
USB
>
57