INSTALLATION - MEdIA MANAGER
Media Manager installation
The CMM1 is connected to the home's network. It requires a DHCP-
enabled router to obtain its IP address, as it does not support a static IP
address on the network. Connect the CMM1 to the router with an RJ45-
terminated CAT-5 straight through cable (T568A standard). The network
must be a minimum 10/100 BASE-T Ethernet.
Computer
RJ45 T568A wiring standard
8
NAS server
CAT-5 cable
Required DHCP router
with NAT/firewall
Russound Collage System Installation Manual
Note: Do not place the CMM1 on top of the router/switch or any other
heat-producing equipment. Place it on a shelf by itself and do not block
its ventilation.
CMM1
INTERNET
Cable or
DSL Modem
CAK1 keypad
(installed)