Speaker Connection; Communications Connection; Power Supply Connection; External Fm Monopole Antenna - Russound Collage Installation Manual

INSTALLATION ANd CONNECTIONS
CAUTION: Shut OFF power to the keypad until ALL
connections and installation have been completed.

Speaker connection

Insert the removable snap connector (with speaker cable attached) on
the back side of the keypad, keeping channel and polarity correct.
Communication connection
Place the RJ45 end of the patch cable into the RJ45 connector on the
back of the keypad, ensuring a solid connection.

Power supply connection

Place the plug lead of the power supply into the power connector on
the back of the keypad, ensuring a solid connection.
FM monopole antenna
If using the monopole antenna, push the end of the antenna onto the
F-connector, ensuring a solid connection.

Optional external coaxial antenna connection

Push the coaxial cable connector onto the F-connector on the back of
the keypad, ensuring a solid connection.

Keypad installation

Once all cable connections are made, the keypad can be installed in the
back box. Manipulate the cables to allow the keypad mounting plate to
fit snugly against the front edge of the back box.
Attach the keypad with the included hardware. Do not use a power drill
to tighten the screws and do not overtighten by hand.
Snap the bezel in place on the keypad starting at the bottom of the
keypad and snap it into place at the top.
18 Russound Collage System Installation Manual
F-connector
for monopole
antenna
connection
(supports
optional RG6
antenna)
Speaker connection
connection (from power supply)
CAK1 keypad (back panel)
Power connection
(from power
supply)
RJ45 communication cable