Audio Check; Set Time Zone; Required Firmware Update - Russound Collage Installation Manual

Audio check after installation
When all keypads have been installed and powered, perform an audio
check to test speaker operation and sound levels.
From the Initial Setup screen, select Test Audio. The keypad will
automatically test left, right and both speakers. Screen prompts "Test
Audio Done" when finished.

Set time zone

From the Initial Setup screen, select Set Time Zone. Scroll to and set the
desired time zone, and select Back to return to the Initial Setup screen.
NOTE: Once each keypad has been configured, audio has been tested,
and time zone set, press Done on each keypad in the Initial Setup screen
to save changes. Otherwise, the Initial Setup screen will reappear and
you will have to perform setup procedures again.

Required firmware update

Note: A broadband internet connection is required to perform an
update.
The Collage system ships with initial setup software only. A firmware
update must be performed to load the most current firmware version
for full functionality.
To update firmware, select Update. The Status screen shows when an
update is running and its progress (percent finished).
If an error prompt appears, select Update Error and follow the
troubleshooting steps on the Error screen. Select Try Again for another
update attempt.
Russound Collage System Installation Manual
AUdIO CHECk / TIME zONE / FIRMWARE UpdATE
Test audio selection
on Setup screen
Update progress
Firmware update
screen
error prompt
Firmware update
prompt to complete
installation
Troubleshooting
firmware update
errors
19