Toshiba e-studio 2330C Quick Start Manual page 52

Chapter 3 REPLACEMENT OF SUPPLIES
Saddle stitch unit
1

Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
3
Take out two empty staple cartridges.
5
2
Pull the handle of the stapler toward you, and
then lower the stapler to its original position.
50
2

2
2
Pull the handle of the stapler toward you, and
then turn it clockwise.
4
Install two new staple cartridges.
6
2
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.