Advanced Functions - Toshiba e-studio 2330C Quick Start Manual

Chapter 4 ADVANCED FUNCTIONS / TROUBLESHOOTING

Advanced Functions

This section describes the advanced functions.
COPY
Making a booklet stapled at the center in 2-sided printing
1.
Open a file to be printed, and then select [Print] from the file menu of the application.
2.
Select the printer driver of this equipment, and then click [Preferences].
3.
Set "B5" for the Original Paper Size, "A4" for Print Paper Size and "10" for Number of Copies in the
[Basic] tab menu.
4.
Set the [Finishing] tab menu.
) Select the "2-Sided Printing" check box.
2) Select "Booklet".
3) Click [Details].
5.
Set the Booklet Details dialog box.
) Select "A5 on A" for "Output Document Layout".
2) Select "From Left to Right" for "Page Order".
3) Select the "Staple Down the Center" check box.
) Click [OK].
6.
Click [OK] to return to the Print dialog box, and then click [OK].
5
FAX SCAN e-FILING PRINT
EXAMPLE
How to print 12 pages of a B5 size file in 2-
sided printing by shrinking them so that
each 2 pages are printed on 1 A4 sheet, and
then stapled at the center for making 10
sets of booklet type prints is described as
follows. The Saddle Stitch Finisher (optional,
MJ-1030) is required.
1
2
1
2
3
4
For details, refer to the Printing Guide.
3