Toshiba e-studio 2330C Quick Start Manual page 51

Saddle Stitch Finisher (Optional: MJ-1030)
1
Open the front cover of the Saddle Stitch Finisher
and take off the staple cartridge.
3
Install a new staple case into the staple cartridge.
5
Install the staple cartridge onto the stapler.
2
2

Press the buttons on both sides of the cartridge
and take out the empty staple case.
4

Press down the transparent cover and pull out the
seal.
6
Close the front cover of the Saddle Stitch Finisher.
Adding Staples

3
2
1
2
3
4
5
9