Setting Up The Security Function - Panasonic PT-L785U Operating Instructions Manual

Setting up the security function

This projector is equipped with a security function. A password input screen
can be displayed, or a company URL can be set up and displayed at the
bottom of the projected image. A logo also can be displayed before projection.
Press the I or H button on the
projector or remote control unit to
select "SECURITY", then press the
G button.
SECURITY
PASSWORD SETTING INVALID
CHANGE PASSWORD
TEXT DISPLAY
CHANGE TEXT
LOGO DISPLAY
LOGO CLEAR
LOGO CAPTURE
PASSWORD
OK:[ENTER] CANCEL:[MENU]
(When you use the "SECURITY"
function for the first time)
Press the F, H, G, I, F, H, G
and I buttons in order, then press
the ENTER button.
(When a password change has
been made before)
Type in the changed password, then
press the ENTER button.
SECURITY
PASSWORD SETTING INVALID
CHANGE PASSWORD
TEXT DISPLAY
CHANGE TEXT
LOGO DISPLAY
LOGO CLEAR
LOGO CAPTURE
SELECT:[^][@][{][}]
ADJUST:[{][}]
VALID
OFF ON
OFF ON
VALID
OFF ON
OFF ON
ENTER:[ENTER]
ESC:[MENU]
PASSWORD SETTING
The password input screen can be
displayed when the power is turned
on. All of the controls other than the
POWER button are disabled unless
the password is entered correctly.
VALID
"PASSWORD SETTING" is
enabled.
INVALID
"PASSWORD SETTING" is
disabled. The password input
screen will not be displayed when
the power is turned on.
CHANGE PASSWORD
Passwords can be changed. Press
the ENTER button to display the
"CHANGE PASSWORD" screen.
NEW
CONFIRM
FINISH:[ENTER] CANCEL:[MENU]
# Set a password by pressing the
F,G,I, and H buttons. (A
maximum of 8 buttons can be
set.)
$ Press the ENTER button.
% Enter the password again for
confirmation.
& Press the ENTER button.
Password change will be
completed.
E -51
NGLISH