Setting Up The Security Function; Password Setting, Change - Panasonic PT-L735NTE Operating Instructions Manual

Setting up the SECURITY function

This projector is equipped with a security function. A password input screen
can be displayed, or a company URL can be set up and displayed at the
bottom of the projected image. A logo also can be displayed before projection.
Use the I and H buttons on the
projector or remote control unit to
select SECURITY, then press the G
button.
SECURITY
PASSWORD SETTING INVALID
CHANGE PASSWORD
TEXT DISPLAY
CHANGE TEXT
LOGO DISPLAY
LOGO CLEAR
LOGO CAPTURE
PASSWORD
OK:[ENTER] CANCEL:[MENU]
(When you use the SECURITY
function for the first time)
Press the F, H, G, I, F, H, G
and I buttons in order, then press
the ENTER button.
(When a password change has
been made before)
Type in the changed password, then
press the ENTER button.
SECURITY
PASSWORD SETTING INVALID
CHANGE PASSWORD
TEXT DISPLAY
CHANGE TEXT
LOGO DISPLAY
LOGO CLEAR
LOGO CAPTURE
SELECT:[^][@][{][}]
ADJUST:[{][}]
VALID
OFF ON
OFF ON
VALID
OFF ON
OFF ON
ENTER:[ENTER]
ESC:[MENU]
PASSWORD SETTING
The password input screen can be
displayed when the power is turned
on. All of the controls other than the
POWER button are disabled unless
the password is entered correctly.
VALID
PASSWORD SETTING is enabled.
INVALID
PASSWORD SETTING is disabled.
The password input screen will not be
displayed when the power is turned on.
CHANGE PASSWORD
Passwords can be changed.Press
the ENTER button to display the
CHANGE PASSWORD screen.
NEW
CONFIRM
OK:[ENTER] CANCEL:[MENU]
# Set a password by pressing the
F,G,I, and H buttons on the
remote control unit. (A maximum
of 8 buttons can be set.)
$ Press the ENTER button.
% Enter the password again for
confirmation.
& Press the ENTER button.
(Password change will be
completed.)
E -49
NGLISH