Table of Contents
Advertisement
G Use a plastic clamp to fasten to-
gether the wire harness and the
frame.
H Push couplers into the lock stay
of the frame after connecting
wires.
I Use a plastic band to fasten to-
gether wireharness, starter mo-
tor lead, AC magneto lead, side-
stand switch lead and oil lev-
el / neutral switch lead, then hold
CABLE ROUTING
the clamp to the frame bracket.
Position the band end to out side
of chassis.
J Use a plastic locking tie to fasten
the starter motor lead, AC mag-
neto lead, sidestand switch lead
and oil level / neutral switch lead
to the frame bracket. Cut off the
excess end of the tie.
K Pass the air cleaner drain hose
through the engine clamp.
–10–
SPEC
L Use a steel holder to fasten to-
gether the AC magneto lead,
sidestand lead and oil level / neu-
tral switch lead.
M Pass the air cleaner drain hose
in front of the rear arm pivot shaft
and back of the cross tube.
N Pass the air cleaner drain hose
through the pipe holder of rear
shock absorber bracket, then draw
it out to the left side of the body.
Hide quick links:
Advertisement
Table of Contents
