Yamaha FZS600 2000 Supplementary Service Manual page 17

Wire harness
34
Relay
35
Fuse box
36
To front brake switch
37
To battery negative (–) lead
38
To starter relay
39
Starter motor lead
40
Pickup coupler
41
Sidestand switch coupler
42
Oil level / neutral switch coupler
43
AC magneto coupler
44
CABLE ROUTING
Oil level / neutral switch lead
45
A Use a plastic clamp to fasten the
handlebar switch lead (left),
main switch lead, clutch cable
and starter cable to the frame.
B Pass the fan motor lead through
the guide gear, then into the box.
C Use a plastic clamp to fasten the
horn lead and air guide plate to
the frame.
–9–
SPEC
D When installing the plug cap, the
high tension code should be fac-
ing the inside of the body.
E Pass the wire harness, starter
motor lead, AC magneto lead,
sidestand switch lead and oil /
neutral switch lead over the
cross tube.
F Use a plastic clamp to fasten to-
gether the wire harness and the
frame.