Make sure your electricity supply is the same as the one shown on the We recommend using filtered water from a Kenwood water filter as it produces underside of your machine. better coffee and reduces limescale. Never use fizzy water.
3 Press the pod towards the lower part of the filter, making sure that the paper 5 When the OK light stops flashing, press the 1 cup dispensing button ( ) and flaps adhere to the inner part of the filter. allow water to flow out.
Clean the metal filter in hot water using a brush ¸. Make sure the holes in the metal filter are not blocked. If necessary clean with a pin ¹. Dry the parts then If the cord is damaged it must, for safety reasons, be replaced by Kenwood or reassemble, making sure the parts are correctly assembled.
trouble shooting guide problem possible cause solution The on/off light flashes Limescale has built up inside the Follow the information under descaling. appliance Espresso coffee doesn’t come The water tank is empty. Refill the water tank. out of the machine. The holes in the filter holder spouts Clean the holes in the spouts are blocked.
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK www.kenwood.co.uk 56234/1...