Speaker Connections - LG LH-W250SC Owner's Manual

Connections (Continued)
Speaker System Connection (continued)

Speaker Connections

Connect the speakers to the front (right, left) or center speaker connectors at the main set.
Connect the subwoofer to the woofer connector.
Connect the power cord of the Wireless RX to the outlet, then connect the Wireless RX and the wireless speaker
(right, left) with the speaker cable.
Connect the DC IN connector of the Wireless TX and the Wireless TX (DC 7V OUT) connector at the main set
with the DC power cable.
Connect the SOUND SIGNAL connector of the Wireless TX and rear (right, left) speaker of connectors of the
main set with the sound signal cable.
Set the distance between this unit and Wireless RX within 10m.
Front speaker
(Right)
Wireless speaker
(Right)
otes
Optimum performance can be implemented only when the Wireless TX and the Wireless RX within distance of 2m through 10m
is used since communication failure may occur if closely approaching distance between them.
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted and will lack base.
Do not remove the front cover of supplied speaker.
It takes about a few seconds (and may take longer) for the Wireless TX and Wireless RX to communicate with each other.
When the unit is turned off, the Wireless RX is in standby mode (off) automatically after about 10 seconds.
If the Wireless RX is turned off, the wireless speaker will not function.
10
Center
speaker
Red
Black
Sound signal
cable
Subwoofer
Wireless RX
Wireless TX
SIGNAL ID./CH. DC IN
AUX IN
MONITOR
OUT
DC 7V OUT
Front speaker
(Left)
DC power cable
Wireless speaker
(Left)