Chapter 4: Meter Memory, Setup; Memory, Storing Test Results - EPS Bio Technology EasyMax Voice III User Manual

Self-monitoring blood glucose system

Hide thumbs Also See for EasyMax Voice III:

Table of Contents

Chapter 4: Meter Memory, Setup

Your meter stores a maximum of 480 test results with the time and date of the test. You can review them at

any time. When the memory is full, the oldest result is dropped as the newest is added, so it is very important

to have the correct time and date set in the meter.

1. Do not change your therapy based on one individual result in memory.

2. The memory is not lost when you replace the battery. You do need to check that the

time and date are still correct. See Section "Setting the time and date" in Chapter 1.

3. Once 480 results are in memory, adding a new result causes the oldest one to be

deleted.

4. Control Solution values will be included in the memory and averages. Refer to the

section "Viewing & Deleting Test Results" to delete the control solution values before

averaging your test results.

Table of Contents

Do you have a question about the EasyMax Voice III and is the answer not in the manual?