8.1.6.3
Flex II seat unit
WARNING! Serious injury hazard if one of the armrests falls out of its
bracket because they have been adjusted to a width which exceeds
the permissible value!
• The width adjustment is fitted with small stickers with markings and the word "STOP"! The
armrests must never be pulled out further than the point at which the word "STOP" is
completely legible!
• Always tighten the fixing screws properly once adjustments have been completed!
Requirements:
• Allen key 8 mm
Carrying out adjustments
• Loosen screw (1)
• Adjust armrest to required
position.
• Retighten the screw.
• Repeat this procedure for the
second armrest.
49