• When inserting the battery cases, please
ensure that the guide rods (1) fit exactly in the
guide channels (2) provided at the side of the
battery cases, and that they are not
underneath these!.
• To do this, first place the front of the battery
case on the guide rods and then push the
assembly in!
NOTE:
Once the wheelchair is reassembled, you must ensure that the locking system on the rear
battery case has completely engaged. Check the correct seating of the locking pins! Also check
the power supply. To do this, switch the wheelchair on at the remote. If the electric wheelchair is
not ready to drive, check that the battery case has been fitted correctly!
144