Table of Contents
Advertisement
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
•
Fit the side runner frames into the ho-
les on the side walls inside the oven
(Fig. 8.1).
•
Slide the rack and the tray into the run-
ners (Fig. 8.2).
The rack must be fitted so that the sa-
fety catch, which stops it sliding out,
faces the inside of the oven (fig. 8.2).
•
To dismantle, operate in reverse order.
INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down.
The bottom of the oven, side runner fra-
mes, tray and rack can be removed and
washed.
The cavity should be cleaned using a mild
detergent solution and warm water.
Suitable proprietary chemical cleaners may
be used after first consulting with the ma-
nufacturers recommendations and testing
a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/
cloths should not be used on the cavity sur-
face.
NOTE: The manufacturers of this applian-
ce will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity.
30
Fig. 8.1
Fig. 8.2
Advertisement
Table of Contents
