Setting The Clock; Using The Timer - Kenwood CK 409 Instructions For Use - Installation Advice

Freestanding electric double oven with induction hotplate
Table of Contents

Advertisement

"TOUCH-CONTROL" KEYS
The "touch-control" keys shall be operated by the fingers (just by touching the key).
When using touch controls it is best to use the ball of your finger rather than the tip.
The keys are automatically deactivated:
8 seconds after the last selection; the deactivation is indicated by an acoustic signal
("beep").
To reactivate just touch the "

SETTING THE CLOCK

When first connected, or after a power failure, the digits and "AUTO" will shown on the
display. To set the clock, touch the "
or "
" keys.
Important: The oven does not operate, in manual cooking, without first having set the clock.
To set the clock, with the appliance already connected, touch the "
taneously (for more than 2 seconds), then "
Important:
changing the time will delete any automatic program;
after setting the clock, the oven starts to operate in the selected function (ma-
nual cooking). The "

USING THE TIMER

You can use the timer at any time, even when the oven is not in use.
The timer does not turn the oven off.
The timer can be set for up to 23 hours and 59 minutes.
To set the timer, touch the "
than the "
" or "
After about 8 seconds an acoustic signal ("beep") will sound confirming the regulation
("
" symbol steady illuminated).
To check the remaining time touch the "
ning time is more than a minute the display will show hours and minutes; if less than a
minute the display will show seconds.
When the time is up, the timer will beep. Touch the "
to turn it off; or press the "
more than 2 seconds, to deactivate the "
Turn off the oven manually (function and thermostat knobs in the off position) if
the manual cooking has been completed.
SETTING THE TIMER VOLUME
You can select from three volume levels.
Touch the "
Touch the "
"ton2" or "ton3").
Touch the "
Timer volume activated: the last displayed.
After about 8 seconds an acoustic signal ("beep") will sound confirming the volume
setting; then the time of day will be displayed.
" key or the "
" symbol is steady illuminated.
" key for more than 2 seconds (the "
" keys.
" or "
" and "
" keys simultaneously for more than 2 seconds.
" key; you can read on the display the current timer volume ("ton1",
" key to listen or change the timer volume.
" and "
" keys.
" key, for more than 2 seconds, and then the "
" or "
" keys.
" key for more than 2 seconds. If the remai-
" key to stop the beep and than the "
" symbol flashing on the display.
" and "
" symbol flashes),
" key , for more then 2 seconds,
"
" keys simul-
" key, for
27

Advertisement

Table of Contents
loading

Table of Contents